Buscar este blog

viernes, 6 de septiembre de 2013

Ametralladora Breda M30


Ametralladora ligera italiana 
Breda M30


La ametralladora Breda M30 fue fabricada por Breda Meccanica Bresciana y estuvo en producción entre 1930 y hasta el final de la contienda. La alimentación de la ametralladora ligera Breda M30 estaba situada a su derecha y se efectuaba mediante cargadores de 20 proyectiles. Este cargador era plegable y estaba unido al arma mediante una bisagra y podía ser recargado con 4 peines de fúsil Carcano de 6´5 mm. Era accionada por retroceso de masas y disparaba a cerrojo cerrado. Tenía una culata de madera y un bípode plegable bajo el cañón para facilitar el disparo desde la posición de cuerpo a tierra.

Una de las pocas ventajas de esta arma era que cualquier soldado podía recargar la munición de los cargadores usando los peines de fúsil. En otros muchos aspectos la M30 resultó ser una pesadilla para las tropas que la utilizaron ya que era considerada muy poco fiable. El cargador utilizado era frágil y si se rompía podía inutilizar completamente el arma, además, tenía una baja cadencia de fuego (500 disparos por minuto), el cartucho que empleaba estaba falto de potencia y, por si fuera poco, tendía a bloquearse produciendo interrupciones de fuego. Disponía de un sistema para el cambio de cañón pero al carecer de un asidero esta maniobra era complicada.


Lo más destacado de la ametralladora M30 era el sistema de disparo que se efectuaba a cerrojo cerrado a pesar de ser accionada por retrocesos de masas. Este sistema de disparo favorece el rápido sobrecalentamiento de la recámara y el cañón, lo que provoca el encendido del cartucho antes que este se halle completamente dentro de la recámara. Al disponer de este sistema de disparo la Breda M30 se sobrecalentaba con facilidad, y a diferencia de las que disponían de cerrojo abierto, se enfriaba más lentamente. Otro problema del encendido del proyectil era el fuego accidental al cambiar de posición de tiro. También disponía una pequeña bomba de aceite similar al sistema empleado por la ametralladora japonesa Type 96 que lubricaba el proyectil antes de ser introducido en la recámara. Sin embargo este sistema atraía el polvo y arena provocando frecuentes atascos en el arma.

Algunas de las ametralladoras fueron recalibradas para aceptar la munición del calibre 7´35 mm denominándose como M37. A pesar de este intento de mejorar la potencia de fuego del arma se fabricó en cortos lotes. En cuanto a sus características, alcanzaba un peso total de 10´6 Kg y tenía un alcance efectivo de 800 metros.


Fuentes:
McNAB, C. “Twentieth-century Small Arms” Grange Books, 2004
BISHOP, C. “The Encyclopedia of Weapons of World War II Barnes & Nobel, 1998

Egnlish version

The Breda M30 machine gun was manufactured by Breda Meccanica Bresciana and was in production from 1930 until the end of the war. Feeding the Breda M30 light machine gun was placed to his right and was done by 20 projectiles chargers. This charger was folded and was attached to the gun by a hinge and could be recharged with 4 combs of 6.5 mm Carcano rifle. It was blowback operated, firing a closed bolt. It had a wooden stock and a folding bipod under the barrel to facilitate shooting from the earth body position.

One of the few advantages of this weapon was that any soldier could reload ammunition chargers rifle using combs. In many other respects, the M30 was a nightmare for the troops who used it as it was considered very unreliable. The charger used was fragile and if broken could completely disable the gun also had a low rate of fire (500 rounds per minute), the cartridge used was underpowered and, not least, tended to become blocked causing disruptions fire. Have a system for changing the barrel but lacking a handle this maneuver was complicated.


 Ammo clip for Breda M30

The highlight of the M30 machine gun was the trigger system that locked breech was made despite setbacks be driven by mass. This trigger system promotes rapid overheating chamber and the barrel, which causes the ignition of the cartridge before this is found completely inside the chamber. By having this system the Breda M30 shot easily overheated, unlike that were available from open bolt, it cooled more slowly. Another problem of the projectile on the fire was accidental shooting position change. It also had a small oil pump similar to the system used by the Japanese Type 96 gun projectile lubricated before being introduced into the chamber. However, this system attracted dust and sand causing frequent jams in the gun.

Some of the guns were recalibrated to accept the 7.35 mm caliber ammunition being referred to as M37. Despite this attempt to improve the firepower of the weapon was manufactured in short batches. As for their characteristics, reaching a total weight of 10'6 kg and had an effective range of 800 meters.


Breda M30 Russian front

Sources:
McNAB, C. “Twentieth-century Small Arms” Grange Books, 2004
BISHOP, C. “The Encyclopedia of Weapons of World War II Barnes & Nobel, 1998

No hay comentarios:

Publicar un comentario